How to properly install Oxide 2.0 and enter admins

From Nitradopedia EN
Jump to: navigation, search
RustBanner.png

Rent a prepaid Rust Gameserver now at nitrado.net

Installation of Oxide 2.0

Configure Server
The first step is to check whether the server has the oxide option activated

This option is found under "Settings">"General" in the web interface.
Oxide webinterface.png

With the next restart, the Rust server starts with the latest Oxide version.


Add Admins

Required:

  • An AdminTool (Recommended is RustAdmin)
    • Rcon data for the tool:
      • IP: YOUR IP
      • Port: listed on your web interface in the dashboard
      • Rcon Port: listed on your web interface in the dashboard below the usage graphs
      • Rcon Password: YOUR RCON PASSWORD on the General settings of your web interface


Now the SteamID is needed. The profile URL can be copied in Steam profile with right-click. This link can now be inserted into the SteamID-Converter.


If this is done, RustAdmin can be logged in. (Please note: If "Copy" and "Paste" is used, one or more bookmarks may be creeping in).


Once you are successfully connected to the tool, the following command can be executed:

Ownerid SteamID

For example:

Ownerid 1234567 And, confirm by pressing the Enter key.

Then run the "server.writecfg" command to save the changes.


Now there are 3 new files (bans.cfg, server.cfg y users.cfg) in the following directory:/rust/server/serverprofile/cfg

In the users.cfg file, the following must be entered: ownerid STEAMID64 "Nameless" "without reason" To add non-Admin players, it is only necessary to copy this line with the corresponding SteamID.

Retrieved from "https://wiki.nitrado.net/en/index.php?title=How_to_properly_install_Oxide_2.0_and_enter_admins&oldid=11989"