Admin commands for Assetto Corsa Competizione

From Nitradopedia EN
Jump to: navigation, search
Acc Banner wiki.jpg
Rent your own prepaid Assetto Corsa Competizione server now nitrado.net

The following admin commands are currently available in the game.

Command Number Description
/next Jump to the next section ( P -> Q -> R )
/restart Restarts the current section ( P -> Q -> R )
Insert a space between the command and the start number and in front of the kg and %value
/kick 1 bis 998 The driver of the car will be banned from the server until the end of the race weekend
/ban 1 bis 998 The driver of the car is banned from the server until the server is restarted
/dq 1 bis 998 Immediately disqualifies the driver of the car, tele-ports the car into the box and locks all controls
/clear 1 bis 998 clears all penalties for the vehicle with the specified start number (drive through and stop & go)
/clear_all clears all penalties for all vehicles
/cleartp 1 bis 998 clears all time penalties for a driver/vehicle
/sg10 1 bis 998 Stop & Go with a 10 second downtime
/sg20 1 bis 998 Stop & Go with a 20 second downtime
/sg30 1 bis 998 Stop & Go with a 30 second downtime
/tp5 1 bis 998 + 5 seconds penalty time (repeatable)
/tp5c 1 bis 998 + 5 seconds penalty time + reason: collision (repeatable)
/tp15 1 bis 998 + 15 seconds penalty time (repeatable)
/tp15c 1 bis 998 + 15 seconds penalty time + reason: collision (repeatable)
/dt 1 bis 998 Assigns a drive-through penalty to the specified car. As with other DTs, the driver concerned must take the penalty within 3 laps, otherwise the car will be disqualified. If the race ends within these 3 laps, the DT will be converted into a time penalty of 80 seconds
/dtc 1 bis 998 see dt + reason: collision (repeatable)
/ballast 1 bis 998
+ kg
Sets the vehicle's ballast (in kg) to the value you specify. This overwrites any other ballast value assigned to this vehicle.
  • Example: / ballast 113 15 = car with start number 113 is loaded with 15 kg of ballast
  • Values ​​from 0 to 100
/restrictor 1 bis 998
+ %
Sets the limiter of the vehicle (in%) to the defined level. This takes precedence over any other restrictions assigned to that vehicle.
  • Example: /restrictor 113 7 = car with starting number 113 is throttled by 7%, which leads to about 7% less horsepower at maximum speed.
  • Values ​​from 0 to 20
/manual entrylist Creates a .json file in the “results” folder with a list of the drivers currently on the server (see setting.json -> dumpEntryList). This can then be used as entrylist.json.
/debug formation Writes data about the current cars and their status to the server console. Useful information to identify errors during the induction round.
/debug bandwidth Writes data about the server to the server console. Enter the command again and the recording of the data will be stopped.
/debug qos Continually writes data about the network connection quality to the server console. Enter the command again and the recording of the data will be stopped.